Z-511605.ZL FAG ROLL NECK BEARINGS for ROLLING MILL
Brand Name: | FAG |
Model Number: | Z-511605.ZL |
Series: | 1700 |
Cone Part Number: | 1755 |
Cup Part Number: | 1729-B |
Design Units: | Imperial |
Bearing Weight: | 0.4 lb |
Cage Type: | Stamped Steel |
d: | 0.8750 in |
D: | 2.2400 in |
Product Details
Series | 1700 |
Cone Part Number | 1755 |
Cup Part Number | 1729-B |
Design Units | Imperial |
Bearing Weight | 0.4 lb |
Cage Type | Stamped Steel |
d | 0.8750 in |
D | 2.2400 in |
D1 - Flange Outer Diameter | 2.3920 in |
B - Cone Width | 0.7810 in |
C - Cup Width | 0.6250 in |
C1 - Cup Flange Width | 0.1560 in |
T1 - Bearing Width | 0.7628 in |
T - Bearing Width to Flange | 0.2938 in |
R - Cone Backface To Clear Radius1 | 0.050 in |
r - Cup Backface To Clear Radius2 | 0.030 in |
da - Cone Frontface Backing Diameter | 1.08 in |
db - Cone Backface Backing Diameter | 1.14 in |
Da - Cup Frontface Backing Diameter | 2.11 in |
Ab - Cage-Cone Frontface Clearance | 0.08 in |
Aa - Cage-Cone Backface Clearance | 0.01 in |
a - Effective Center Location3 | -0.27 in |
C90 - Dynamic Radial Rating (90 million revolutions)4 | 2650 lbf |
C1 - Dynamic Radial Rating (1 million revolutions)5 | 10200 lbf |
C0 - Static Radial Rating | 10200 lbf |
Ca90 - Dynamic Thrust Rating (90 million revolutions)6 | 1390 lbf |
K - Factor7 | 1.9 |
e - ISO Factor8 | 0.31 |
Y - ISO Factor9 | 1.95 |
G1 - Heat Generation Factor (Roller-Raceway)10 | 10.6 |
G2 - Heat Generation Factor (Rib-Roller End) | 5.39 |
Cg - Geometry Factor11 | 0.0521 |