HT10-42E1Z Kaydon Slewing Ring Bearings
| Brand Name: | Kaydon |
| Model Number: | HT10-42E1Z |
| da: | 122.237 mm |
| Da: | 250 mm |
| Ca: | 77.8 mm |
| A1: | 149.225 mm |
| A2: | 260.35 mm |
| S: | 4.763 mm |
| ba: | 61.119 mm |
| H: | 298.45 mm |
Product Details
| da | 122.237 mm |
| Da | 250 mm |
| Ca | 77.8 mm |
| A1 | 149.225 mm |
| A2 | 260.35 mm |
| S | 4.763 mm |
| ba | 61.119 mm |
| H | 298.45 mm |
| H1 | 152.4 mm |
| H2 | 60.325 mm |
| J min. | 406.4 mm |
| J max. | 434.975 mm |
| J1 | 85.725 mm |
| L | 511.175 mm |
| N1 | 28.575 mm |
| R1 | 87.313 mm |
| R2 | 38.1 mm |
| RG | 3/4 NPT |
| PG | 1/4 NPT |
| h | 51.594 mm |
| Housing | SAFS 528 |
| Stabilizing ring | SR-28-0 |
| Taconite seal | TER 120 |
| End plug (suffix Y) | EPR 27 |
| Max. speed for Taconite seal | 625 r/min |
| P60° | 301 kN |
| P90° | 180 kN |
| P120° | 116 kN |
| P150° | 105 kN |
| P180° | 127 kN |
| Pa | 28.5 kN |
| Mass pillow block | 92.5 kg |
| Cap bolt | 7/8-9 UNC |
| Cap bolt recommended tightening torque | 813.5 N·m |
| Cap bolt, SAE grade | 8 |
| Eye bolt | 2 x 3/8-16 UNC |
| Appropriate attachment bolt size G | 1 in |
| Initial grease fill | 481.95 g |